With a power range firing from 5 watts up to a massive 220 watts, the Dynamo Mod is superb at creating large clouds of vapour but retains the flexibility to work with any tank. The large size along with the the vibrant colours of the display mean this is an impressive looking mod which looks great in your hand.
Coming with rounded edges, the Dynamo fits neatly into your hand. But the stand out feature is the 2 inch, round TFT* display. As default this shows the time and date - handy if you don’t wear a watch. But touch the fire button and it comes alive with a bright and colourful display showing your essential vape set up info (power setting, power level, voltage and more.)
*TFT: thin film transistor.
One of the stand out features for us is how easy it is to the advanced features of this mod. In the past we’ve struggled through complicated controls, so it’s a delight to be able to navigate the customisation controls in this mod. (See below for instructions.)
With a couple of clicks (all possible with one hand!) you can easily access wattage, voltage, bypass and temperature control modes and set the customisable power settings (soft, normal or hard). Even if you haven’t used these settings before, the ease of use makes it easy to dip your toes into customised vaping!
As is increasingly common with regulated mods from the better manufacturers, the Aspire Dynamo comes with a range of protections designed to give you peace of mind. You can see all these listed below under specs.
Although easy to use on the basic settings, this is really a mod designed for cloud chasers and for more experienced vapers who like to be able to customise their mod to get the perfect vape. The high power ranges mean this perfect for pairing with low resistance coils and tanks designed for clouds, while the customisation features allow superb control over your vape.
The Aspire Dynamo uses two external batteries. We recommend using the either Extreme Vaping 18650 batteries or Avatar 21700 batteries.
TURNING ON AND OFF
As with other Aspire devices, click five times to lock or unlock the device. To turn off the Dynamo, first lock the device and then hold the power button for two seconds. Press five times to turn the device back on.
LOCKING POWER SETTINGS
Locking the power button can avoid accidentally increasing the wattage and thus protects your coil. To lock, press the down and fire button together.
NAVIGATING THROUGH THE MODES
Click up and fire button to select modes. Click fire button to enter modes. Use up and down button to click through modes, using the fire button to select the mode you want. Press up and down button together to exit menu.
CHANGING WATTAGE MODE
When you are in wattage mode, press the up and down buttons simultaneously to select the wattage mode (soft, normal, or hard).
CHANGING TCR MODE
When in TCR mode, press the up and down buttons together to get to power and TCR settings. Press the fire button to switch between power and TCR settings, and the up and down buttons to adjust them. Please note that TCR settings can only be adjusted in the M modes.
- Spring loaded firing pin
- Powers from 5 to 220 watts
- 2 inch TFT screen with unique round design
- Lock power at your preferred settings
- Dual batteries
- Rounded corners
- Wattage/Voltage/BYPASS/TC (Ni,Ti,SS,M1,M2,M3)
- Airflow adjustment flow
- CPS (Customizable Power Settings)
BATTERY PROTECTION
- Automatic cut off
- Short circuit protection
- Over discharge protection
- Over charge protection
- Over heat protection
